OEM and private-label solar lights from Guzhen, China
Put your brand on the product, the carton or both. Your logo by printing, laser marking or a moulded mark; your own carton, barcode, insert and manual; and, on pillar models that support it, your own pattern on the centre acrylic panel. Logo method, minimum quantity, tooling and lead time are quoted per project.
What can carry your brand
- Your logo on the product: printing, laser marking or a moulded mark.
- Your own packaging: carton artwork, barcode, insert and manual. The factory's standard carton sizes and pack quantities, listed with the models on this site, are the starting point.
- Your pattern on supported pillar lights: the factory says the centre acrylic panel can carry a pattern you supply; ask which models take it.
- Your choice of size, body material and cap style from the standing range below.
A paid sample settles print position, colour and finish before production. The factory builds to an approved sample or to changes on an existing body; original product design is not offered.
Build from the standing range
These options already run across the 204 models on this site, so choosing them is a specification, not a development project.
| Choice | What is available |
|---|---|
| Size | Pillar lights from 100 mm to 500 mm base width; split-panel street lights with separate 20 W to 100 W panels; all-in-one street lights with built-in 3 W to 35 W panels |
| Body material | ABS with acrylic, or aluminium with acrylic, in most pillar styles |
| Cap and panel style | Around thirty styles, from plain and lattice through to glazed-tile and cast decorative caps |
| Power | Solar with an internal cell, or mains with an E27 or G9 lamp holder, on the styles built both ways |
| Light colour | Four selectable modes on the solar pillar models that list them: cool white, warm white, neutral white and red |
| Panel and battery pairing | Panel rating and cell capacity step with body size; ask us to size them for your latitude and required run hours |
Power and control are listed per model. The mains pillar versions (model codes ending in -E) are ABS styles, each listed with its E27 or G9 lamp holder; the four colour modes on a remote come on the solar pillar models that list them. The aluminium pillar models listed on this site are solar; the factory's specification sheet also describes the aluminium range as available as a mains fitting with an E27 lamp holder and remote control, so name the power system, lamp holder and control method for your exact model on the quotation and sample approval. Start from a priced model such as the WC-PA-GT-300 glazed-tile pillar light or the WC-SL-AI1-200W all-in-one street light.
Custom acrylic patterns and detachable posts
On supported pillar models, the centre acrylic panel can carry your pattern, the factory says. For overseas pillar-light orders, the factory recommends blank-design versions with detachable posts, assembled on arrival, to help reduce freight costs.
Send the model or style and your pattern with the enquiry, and ask which models take this option. Have the written quotation state model availability, artwork, quantity, price, lead time, assembly details and final packing; see freight-ready quotations.
Tooling, ratings and documents
These are not standing promises or fixed price-list options. Include each one your project needs in the brief, so the factory's written answer, price and terms are recorded on the quotation:
- A new mould or a changed housing: tooling cost, ownership of the tool and amortisation are agreed in writing before anyone spends money.
- A specified IP rating, lumen output or certification: no IP-rating test report, LM-79 report or product certificate is in the public document set for these models (see certificates and test reports). If your project needs one, put the required test scope, cost and lead time on the quotation before production.
How a private-label project runs
- Brief. Model or style, quantity, destination market, and what has to carry your brand: the product, the carton, or both.
- Written quotation. Unit price, MOQ, tooling if any, lead time and packing.
- Sample. Paid, and credited against the first order when agreed at quotation stage. For branded work this is the stage that settles print position, colour and finish.
- Pre-production approval. You sign off a golden sample. Production is built to that, not to the catalogue photograph.
- Inspection and shipment. Third-party pre-shipment inspection is available on any order; on a first branded run it is worth the money.
For online sellers
Listings need real data and clean photographs. The specification and packing data published on this site lets you build a listing and cost a shipment before you commit to stock. Ask for clean product photography for the models you select, matched to the product and packaging agreed for your order.
Send an OEM brief on WhatsApp Build a written brief instead
Notes
Branding methods, packaging, tooling and certification work are project terms, not fixed price-list options: the method, minimum, cost and lead time for each are set on the written quotation. The detachable-post and custom-pattern options are the factory's recommendation for overseas pillar-light orders; the eligible models, packed dimensions and assembly method are stated per quotation, and the published carton data describes the standard configuration.